View the manual for the Viper 7116V here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Viper 7116V or do you need help?Ask your question here
The Viper 7116V remote controller is a device used to control a car alarm system. It has a range of up to a quarter mile and uses radio frequency to communicate with the alarm system. The controller is equipped with four buttons: lock, unlock, trunk release, and a panic button. It also has an LCD screen that displays the alarm system's status, such as whether the doors and trunk are locked or unlocked. The Viper 7116V remote controller is compact and has a sleek design, making it easy to carry in a pocket or attach to a keychain. It is powered by a single CR2032 battery, which is included in the package. Additionally, this controller is compatible with many Viper car alarm systems, making it a versatile accessory. In terms of usability, the Viper 7116V remote controller is straightforward to use. Pressing the lock button once will lock the doors, and pressing it twice will activate the alarm system. The unlock button will unlock the doors, and pressing it twice will disarm the alarm system. The trunk release button will unlock the trunk when pressed once. Overall, the Viper 7116V remote controller is a reliable and convenient tool for controlling a Viper car alarm system. Its simplicity, compatibility, and LCD display make it a practical and user-friendly accessory for car owners.
General
| Brand | Viper |
| Model | 7116V |
| Product | remote controller |
| EAN | 093207103421 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Viper 7116V below.
A battery in my remote controller has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
How do I program the Viper 7116V remote controller to work with my vehicle?
To program the Viper 7116V remote controller to work with your vehicle, follow these steps:1. Turn the ignition of your vehicle to the "ON" position.2. Press and release the Control Center button on the remote controller the correct number of times (the default is once). This step is necessary to enter the programming mode.3. After a few seconds, the siren output will cease, indicating that the system is in programming mode.4. Within 10 seconds, press and release the button on the remote controller that you want to program. The parking lights of your vehicle will flash to confirm that the programming was successful.5. Repeat step 4 for each button you want to program on the remote controller.6. Once you have finished programming all the desired buttons, turn the ignition of your vehicle to the "OFF" position to exit the programming mode.Please note that these instructions are based on the Viper 7116V remote controller and may vary slightly depending on your specific vehicle model.
Why is the Viper 7116V remote controller not responding when I press the buttons?
If the Viper 7116V remote controller is not responding when you press the buttons, there could be a few possible reasons for this issue. Here are some troubleshooting steps you can try:1. Check the battery: Ensure that the battery in the remote controller is properly installed and has enough power. Replace the battery if necessary.2. Check the range: Make sure you are within the operating range of the remote controller. Stand closer to the vehicle and try again.3. Check for interference: Avoid using the remote controller near other electronic devices or sources of interference, such as Wi-Fi routers or high-power electrical equipment.4. Reprogram the remote: If the issue persists, try reprogramming the remote controller to the vehicle. Follow the programming instructions provided in the manual to ensure proper synchronization.5. Seek professional assistance: If none of the above steps resolve the issue, it is recommended to consult a professional installer or contact Viper customer support for further assistance.Please note that these troubleshooting steps are general recommendations and may vary depending on your specific situation.
How do I activate the Silent Mode™ feature on the Viper 7116V remote controller?
To activate the Silent Mode™ feature on the Viper 7116V remote controller, follow these steps:1. Turn the ignition of your vehicle to the "ON" position.2. Press and hold the Control Center button on the remote controller for five seconds.3. The parking lights will flash nine times in rapid succession, indicating that the Silent Mode™ feature has been activated.4. To deactivate the Silent Mode™ feature, repeat the same steps: turn the ignition to the "ON" position and press and hold the Control Center button for five seconds.5. The parking lights will flash nine times in slow succession, indicating that the Silent Mode™ feature has been deactivated.Please note that the Silent Mode™ feature allows you to disable the siren and horn sound when arming or disarming the vehicle. This can be useful in situations where you want to minimize noise, such as late at night or in quiet areas.These instructions are based on the Viper 7116V remote controller and may vary slightly depending on your specific vehicle model.
What should I do if the Viper 7116V remote controller's battery is not lasting as long as expected?
If the Viper 7116V remote controller's battery is not lasting as long as expected, you can follow these steps to address the issue:1. Identify the battery type: Check the back of the remote control to determine the type of battery used. The Viper 7116V remote controller can be powered by either two 3V, CR2016 batteries or one 3V CR2032 battery.2. Replace the batteries: Use a small flat blade screwdriver to open the case of the remote control. Remove the old batteries from the holding clip and insert new batteries with the correct polarity. Make sure to orient the new batteries properly.3. Close the case: Reposition the case parts and snap them together by pressing firmly and evenly on the front and back.4. Proper battery disposal: If you need to dispose of the old batteries, please follow your municipal requirements for battery disposal. Directed, the manufacturer of Viper products, cares about the environment and encourages responsible battery disposal.By following these steps, you can ensure that the Viper 7116V remote controller has fresh batteries and optimize its battery life.
How do I use the Valet® feature on the Viper 7116V remote controller?
To use the Valet® feature on the Viper 7116V remote controller, follow these steps:1. Locate the Valet® button: On the remote controller, find the Valet® button. It is usually labeled with the word "Valet" or a key symbol.2. Activate Valet® mode: Press and hold the Valet® button for approximately five seconds. The parking lights of your vehicle will flash to indicate that Valet® mode has been activated.3. Deactivate Valet® mode: To exit Valet® mode, press and hold the Valet® button again for approximately five seconds. The parking lights will flash again, confirming that Valet® mode has been deactivated.When the Valet® mode is activated, it disables the security features of your vehicle's alarm system. This mode is useful when you need to temporarily disable the alarm system, such as when leaving your vehicle with a valet or for maintenance purposes.Please note that the specific steps may vary depending on your vehicle model and the configuration of your Viper 7116V remote controller.
Is the manual of the Viper 7116V available in English?
Yes, the manual of the Viper 7116V is available in English .
Is your question not listed? Ask your question here
